双金属洋葱结构纳米Mo0.9W0.1S2的合成

0 引言 继碳富勒烯和碳纳米管的发现,1992年R.Tenne等首次在Nature上发表了具有类富勒烯和纳米管结构的WS_2,开创了非碳无机类富勒烯(Inorganic Fullerene-like,简称IF)纳米化合物研究的新领域。由于具有与富勒烯碳或碳纳米管相类似     

纯硅MCM-41中孔分子筛合成因素的研究Ⅰ.Na~+、K~+阳离子对合成的影响

本文采用表面活性剂十六烷基三甲基溴化铵（Ｃ１６ＴＡＢｒ，以下为１６３１），在（Ｎａ，Ｋ）ＯＨＳｉＯ２Ｃ１６ＴＡＢｒＨ２Ｏ体系中分别利用室温、水热及干粉法进行了纯硅ＭＣＭ４１中孔分子筛的合成，考察了阳离子Ｎａ＋、Ｋ＋对ＭＣＭ４１合成及稳定性的影响。通过ＸＲＤ对结晶度的测定，发现ＮａＭＣＭ４１的晶化速率明显高于ＫＭＣＭ４１，而热稳定性和水热稳定性较差，且ａ０值小于后者。同时发现，就合成方法而言，室温法得到的产物具有很高的结晶度，利用水热法合成的样品的热稳定性明显较高，而干法得到的分子筛产品具有优良的水热稳定性。     

Vibronisches Spektralverhalten von Molekülen: XX. Theoretische Untersuchung der S2←S0-Absorption des Pyrens im Rahmen der Herzberg-Teller-Näherung erster Ordnung

Summary On the basis of the completely-optimized S₀ and S₂ molecular geometries of pyrene the vibrational structure of the electronic S₂S₀ transition was calculated within both the Condon approach and the first-order Herzberg-Teller approach. The theoretical results demonstrate the significant influence of vibronic coupling. An analysis of the active vibrational modes is given. The theory-experiment comparison within the Herzberg-Teller approach is satisfactory.

     

Optimal virtual orbitals to relax wave functions built up with transferred extremely localized molecular orbitals

Extremely localized molecular orbitals (ELMOs), namely orbitals strictly localized on molecular fragments, are easily transferable from one molecule to another one. Hence, they provide a natural way to set up the electronic structure of large molecules using a data base of orbitals obtained from model molecules. However, this procedure obviously increases the energy with respect to a traditional MO calculation. To gain accuracy, it is important to introduce a partial electron delocalization. This can be carried out by defining proper optimal virtual orbitals that supply an efficient set for nonorthogonal configurations to be employed in VB-like expansions.     

A density functional study on magnetic exchange interaction between Mn(II) ion and nitronyl nitroxide radical in <Emphasis Type="Italic">trans</Emphasis>-and <Emphasis Type="Italic">cis</Emphasis>-metal-radical complexes

The magneto-structural correlation between a Mn(ll) ion, coordinated in an octahedral environment, and two nitronyl nitroxide radical ligands in trans- and cis-metal-radical complexes is investigated by the broken symmetry (BS) approach within density functional theory (DFT). The dependences of coupling constants J on three structural parameters: (i) bond angle θ (Mn-O-N (nitroxide)); (ii) rotating angle ψ, defined by the nitronyl nitroxide radical plane rotating around the axial Mn-O (nitroxide); (iii) bond distance R (Mn-O (nitroxide)) are directly calculated. Our calculations showed that both trans- and cis-Mn(ll)-radical complexes behave a stronger antiferromagnetic interaction, consistent with experiments. In view of molecular orbital theory, the direct exchanges, including σ-type and π-type exchanges, are responsible for the magnetic exchange pathways. There is a preferable linear correlation between the calculated coupling constants J and the overlap integral squares S b between the local magnetic orbitals at the various rotating angle ψ at the fixed bond angle θ and bond distance R, in both trans- and cis-Mn(ll)-radical complexes.     

Calculation of affinities of peptides for proteins

Several methodologies were employed to calculate the Gibbs standard free energy of binding for a collection of protein-ligand complexes, where the ligand is a peptide and the protein is representative for various protein families. Almost 40 protein-ligand complexes were employed for a continuum approach, which considers the protein and the peptide at the atomic level, but includes solvent as a polarizable continuum. Five protein-ligand complexes were employed for an all-atom approach that relies on a combination of the double decoupling method with thermodynamic integration and molecular dynamics. These affinities were also computed by means of the linear interaction energy method. Although it generally proved rather difficult to predict the absolute free energies correctly, for some protein families the experimental ranking order was correctly reproduced by the continuum and all-atom approach. Considerable attention has also been given to correctly analyze the affinities of charged peptides, where it is required to judge the effect of one or more ions that are being decoupled in an all-atom approach to preserve electroneutrality. The various methods are further judged upon their merits.     

Tailoring approach for exploring electron densities and electrostatic potentials of molecular crystals

Experimental and theoretical studies of electron densities and the corresponding derived entities such as electrostatic potentials have been the primary means of understanding the chemical nature and electronic properties of crystalline substances. Conventional crystal calculation methods such as the embedded cluster models are capable of performing calculations on small and medium-sized molecules, while periodic ab initio methods can treat crystals with up to 200 atoms per unit cell. A linear scaling method, viz. the molecular tailoring approach, has recently been developed for obtaining ab initio quality one-electron properties. In the present study, the molecular tailoring approach is employed to generate electron density, electrostatic potential and interaction density maps with the ibuprofen crystal as a test case. The interaction density and electrostatic potential maps produced in the present work succinctly bring out the actual crystalline environment around a given reference molecule by including the interactions with atoms in its neighborhood. The results obtained from the molecular tailoring approach may thus be expected to enhance our understanding of the environment in the crystalline material with reasonably small computational effort.Contribution to the Jacopo Tomasi Honorary Issue     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

Nonlinear Optical Properties of Tri—nuclear Transition Metal Clusters M—（μ—S）s—M′（M=Mo,W;M′=Cu,Ag,Au）

The static polarizabilities and the second-order hyperpolarizabilities of a series of tri-nuclear metal cluster models MS4(M′PPh3)2(M′PPh3)(M=Mo,W;M′=Cu,Ag,Au)have been calculated within the first-principle theoretical framework. The model clusters have two fragments of rhombic units and it is the charge ransfer from one of these moieties to the other that is responsible for nonlinear optical property. This kind of electronic delocaization, differentiated from that of planar π-system, is very interesting and is worthy for further investigation.     

Development of an Amperometric Sensor Highly Selective For Dopamine and Analogous Compounds Determination Using Bis(2,2′‐Bipyridil) Copper(II) Chloride Complex

The use of [Cu(bipy)₂]Cl₂?6H₂O as a biomimetic catalyst in the construction of an amperometric sensor for dopamine determination is reported. The sensor was prepared modifying a glassy carbon electrode with a Nafion membrane doped with [Cu(bipy)₂]Cl₂?6H₂O complex. The sensor presented a higher response in 0.25 mol L^?1 phosphate buffer solution (pH 7.0), with an applied potential of ?50 mV (vs. SCE). In the optimized operational conditions, a linear response range between 35 and 240 μmol L^?1, with a sensitivity of 2.02±0.07 nA l μmoL^?1 cm^?2 and detection limit of 8.0 μmol L^?1 were typically observed for the sensor. The response time presented for this sensor was 0.5 s, presenting the same response for at least 40 successive measurements, with good repeatability (3.0%) expressed as relative standard deviation for n=6. The difference of the response between four sensor preparations was 4%. A detailed investigation about the sensor response for other sixteen phenolic compounds and interfering species were carried out. The sensor was applied in the determination of dopamine in pharmaceutical preparation with success.